Uline S-12768 Instrucciones

S-12768
5 GALLON CARBOY
TOOL NEEDED
Drill
1. Drill hole into 63 mm screw cap. (See Figure 1)
2. Screw faucet into 63 mm screw cap. (See Figure 2)
3. Turn handle outward to open. (See Figure 3)
4. Turn handle to the left or right to close. (See Figure 4)
Figure 1
Figure 4
PAGE 1 OF 3
1-800-295-5510
uline.com
INSTRUCTIONS
5. Unscrew cap covering vent hole. (See Figure 5)
6. Drill hole into vent hole area. (See Figure 6)
7.
Figure 2
Figure 5
Pour le français, consulter la page 3.
Replace cap.
NOTE: If leaking, ensure cap is fully tightened.
Gasket is dense and must be tightened past
initial stopping point.
Figure 3
Figure 6
Para Español, vea página 2.
1020 IS-12768