5. Before removing the base, remove the cover from the port of the back of
the monitor. Press the bu�on to remove the stand.
Bu�on
Make sure the monitor is laid on a flat surface before removing the stand.
6. Hold the support by hand and stand the machine up (Note: during the
process of se�ng up the machine, the machine is s�ll in the lower poly
dragon and does not need to be taken out. Do not hold the screen directly
by hand to prevent the screen from being broken)
6. Wall Moun�ng
1. Take out the rota�ng sha� assembly and press the bu�on to remove it.
Eng-5
Stand Plate