Wall Moun�Ng - LC-POWER LC-M25-FHD-144 Manual Del Usuario

7. Wall Moun�ng
This monitor only includes screws which may be used when a�aching
the monitor to a VESA 75*75mm type mount. No VESA mount or
moun�ng accessory is included.
1. Take out the whole machine (with styrofoam) and place it on the horizontal
table.
2. As shown in the figure above, remove the screws from the rear housing.
3. Screw the four hexagon studs of the accessory at this posi�on for
connec�ng to the wall bracket (this machine does not have wall bracket,
it needs to be purchased separately, standard VESA hole, 75 * 75mm).
Remove 4 screws
at this posi�on
Screw the four hexagon
studs in this posi�on
Eng-6