King Innovation KING AL Manual De Instrucciones página 10

INSTRUCTION MANUAL
In the case that more than one hot spot is found,
follow the steps below.
Mark each hot spot. Turn off the transmitter, move the black lead
from the ground stake and connect it to the common wire. Turn the
transmitter back on and set to the highest reading. Return to the first
hot spot, touch the receiver tip to the ground, and turn the sensitivity
knob to mid-scale. Move through each hot spot, watching the strength
of the signal at each. Determine which hot spot has the strongest
signal. This is the station wire you are connected to.
FIGURE 6: Determining Depth
Locating Broken Wire End
I
10 KING INNOVATION