Intended Use; Identification Plate - Cub Cadet 17CIDGHB603 Instrucciones De Funcionamiento Originales

Safety information
¾ The engine and exhaust become hot and can
lead to buns. Do not overfill!
¾ Only use the mower in dry weather
conditions. Keep the mower away from rain or
dampness. If used on wet grass, the mower may
slip because of reduced adhesion.
¾ Do not use the mower if it is raining or there
is a risk of storms.
¾ Handle fuel with care. Fuel and petrol
vapour is explosive and petrol is extremely
flammable. Do not refill the fuel tank while the
engine is running or still hot. Only refuel the
mower outside. Store fuel in approved containers
only and never close to sources of heat (e.g.
heaters, stoves or hot-water boilers). Have a
damaged exhaust unit, fuel tank or fuel cap
replaced.

Intended use

This device is designed to be used
- as a lawn tractor for mowing lawns in the house
garden and leisure garden,
- with accessories which are approved expressly for
use with this lawn tractor,
- in accordance with the descriptions and safety
instructions given in these operating instructions.
Any other use is not as intended.
Improper use is not covered by the warranty and
the manufacturer will reject any liability. The user is
liable for injuries to third parties and damage to their
property.
Unauthorised changes to the device exclude liability
of the manufacturer for any resulting damage and/
or injury.
This mower is not licensed for use on public roads
or for transporting people.
Safety information
¾ Do not start the engine if any petrol has been
spilt. Push the mower away from the area where
the petrol was spilt and wait until the petrol fumes
have evaporated.
¾ To prevent a fire hazard, keep the engine,
exhaust, battery, the fuel tank and the
hydraulic parts free from grass and leaking
oil.
¾ Also follow the instructions in the engine
handbook.
You will find the identification plate under/in front of
the driver's seat.
MODEL NUMBER
1
XXXXXXXXXXX
2
XXXXXXXXX
XXX KG
4
Layout
1 Model number
2 Model name
3 Weight
4 CE mark
5 Manufacturer
6 Engine speed (rpm)
7 Output
8 Serial number
9 Year of construction

Identification plate

9
DOM SERIAL NUMBER
XX/XXXX XXXXXXXXXXX
XX,X KW
XXXX /MIN
Assembled in USA from U.S. &
Global components
MTD PRODUCTS AG
INDUSTRIESTR. 23
D 66129 Saarbrücken
EN
8
7
6
5
13