Uline H-4407 Manual Del Usuario página 4

7. On the frame, place a clip on each hole of the
seat and foot braces. On the foot braces, use the
intermediate holes. The clips should have the center
indent facing up and be horizontal. Insert 5/16"
carriage bolt through each clip and frame and
attach nut loosely. (See Figures 13 and 14)
Figure 13
Figure 14
Intermediate
8. Attach foot planks. Beginning with the bottom row,
place one foot plank on top of the clips, making
sure the clips rest under the plank in the outside
channels. The foot plank should have an 18"
overhang on both ends, measuring from the center
of the frame. Repeat for second foot plank.
(See Figure 15)
PAGE 4 OF 15
ASSEMBLY CONTINUED
Holes
Figure 15
18"
9. Confirm the frame is straight and square. Center of
the left foot plank frame to center of the right foot
plank frame should measure 6' on center.
(See Figure 16)
10. Underneath the foot plank, turn the clips vertical so
the grooves of the clip fit securely under the
channel lips. Tighten the clips
with flange nuts.
(See Figures 17-19)
Figure 17
Figure 19
5/16" Carriage Bolt
Flange
Nut
Figure 16
Figure 18
Hold Down Clip
0122 IH-4407