Uline H-7060 Manual Del Usuario página 2

3. Insert four 1/4 x 1½" screws (7) through side frame
tube into holes located on underside of seat
cushion. (See Figure 3)
Figure 3
4. Lift fabric on back cushion to expose screw holes.
Align side frames with holes on back cushion and
attach using four 1/4 x 7/8" screws (6). (See Figure 4)
Figure 4
PAGE 2 OF 6
ASSEMBLY CONTINUED
5. Lower fabric to cover screw holes. (See Figure 5)
7
6. Use Allen wrench to fully tighten all screws.
7.
6
1-800-295-5510
uline.com
Figure 5
Floor glides can be adjusted to compensate for
uneven floors. (See Figure 6)
Figure 6
0921 IH-7060