EN
36
Maintenance
• When you move the unit, hold it by the sides or floor. Do not hold it by the edges
of the top.
• The unit should be serviced by an authorized technician and only original spare
parts should be used. Do not attempt to repair the unit yourself. Repairs by
inexperienced persons may result in injury or serious malfunction.
• If the unit is not to be used for an extended period of time, disconnect it from the
power supply. Remove all food and clean the appliance. Leave the door open to
prevent unpleasant odours.
TROUBLESHOOTING
Problem
Possible Cause
Appliance does
Temperature regulation knob is
not work
set at number "0".
Mains plug is not plugged in or
is loose.
Fuse has blown or is defective.
Socket is defective.
The food is too
Temperature is not properly
warm.
adjusted.
Door was open for an
extended period.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
The appliance is near a heat
source.
Appliance cools
Temperature is set too cold.
too much
Suggested Solution
Set the knob at other number to
switch on the appliance.
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are to be
corrected by an electrician.
Please look in the initial
Temperature Setting section.
Open the door only as long as
necessary.
Turn the temperature regulation
to a colder setting temporarily.
Please look in the installation
location section.
Turn the temperature regulation
knob to a warmer setting
temporarily.