TROUBLESHOOTING
Problem
Condensation on outside of
door.
Condensation on the inside
of the cabinet.
Too cold / not cold enough
inside the cabinet.
No power to cooler.
Possible cause and suggested solution
Humidity in the room is high. This is also to be
expected if the room is very warm.
This is also caused by high humidity. You can
minimise this by only keeping the door open only as
long as you need to.
Adjust thermostat up or down accord ingly. Make
sure nothing is stopping the door from sealing
properly.
Check power cord, power supply or on/off switch.
EN
17