Technical Data - Kraftixx TKS 254/2000 Manual De Instrucciones Original

The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
The equipment is to be operated only with suita-
ble saw blades (saw blades made of HM or CV)
It is prohibited to use any type of HSS saw blade
and cutting-off wheel.
To use the equipment properly you must also
observe the safety information, the assembly
instructions and the operating instructions to be
found in this manual.
All persons who use and service the equipment
have to be acquainted with these operating
instructions and must be informed about the
equipment's potential hazards. It is also imperati-
ve to observe the accident prevention regulations
in force in your area. The same applies for the
general rules of health and safety at work.
The manufacturer will not be liable for any chan-
ges made to the equipment nor for any damage
resulting from such changes. Even when the
equipment is used as prescribed it is still impossi-
ble to eliminate certain residual risk factors.
The following hazards may arise in connection
with the machine's construction and design:
•
Contact with the saw blade in the uncovered
saw zone.
•
Reaching into the running saw blade (cut
injuries).
•
Kick-back of workpieces and parts of work-
pieces.
•
Saw blade fracturing.
•
Catapulting of faulty carbide tips from the saw
blade.
•
Damage to hearing if essential ear-muffs are
not used.
•
Harmful emissions of wood dust when used
in closed rooms.
Anl_TKS_254-2000_SPK7.indb 29
GB

4. Technical data

AC motor ............................... 230- 240 V ~ 50 Hz
Power P at 5,000 min
-1
............................... S1 1800 W - S6 40% 2000 W
Power P at 3,200 min
-1
Idle speed n
0
Speed 1 .............................................3,200 min
Speed 2 .............................................5,000 min
Carbide saw blade .......... Ø 254 x Ø 30 x 2.8 mm
Number of teeth ............................................... 24
Carbide saw blade .......... Ø 254 x Ø 30 x 2.6 mm
Number of teeth ............................................... 48
Table size ...................................... 580 x 546 mm
Table width extension left/right ...... 580 x 152 mm
Table length extension: .................. 540 x 250 mm
Support surface max. .................... 830 x 850 mm
Cutting height max. ........................... 85 mm / 90°
........................................................ 65 mm / 45°
Height adjustment .................... infi nite 0 - 85 mm
Tilting saw blade .......................... infi nite 0° - 45°
Extractor connection .............................Ø 36 mm
Weight ........................................ approx. 21.5 kg
Laser class: ...................................................... 2
Wavelength of laser: ................................ 650 nm
Laser output: .......................................... ≤ 1 mW
Battery ... ............................. 2x 1.5 V, AAA/LR03
Protection class: ........................................... II/
Thickness of the splitter: ......................... 2.5 mm
Permissible tooth pitch of saw blade: ... > 2.5 mm
Permissible basic blade thickness of saw blade:
.............................................................. < 2.5 mm
Operating mode S6 40%: Continuous operation
with idling (cycle time 10 minutes). To ensure that
the motor does not become excessively hot, it
may only be operated for 40% of the cycle at the
specifi ed rating and must then be allowed to idle
for 60% of the cycle.
Danger!
Noise
The noise emission values were measured in ac-
cordance with EN 62841.
Operation
L sound pressure level ........................ 97 dB(A)
pA
K uncertainty ........................................ 3 dB(A)
pA
L sound power level ......................... 110 dB(A)
WA
K uncertainty ........................................ 3 dB(A)
WA
- 29 -
.......................... S1 650 W
-1
-1
28.06.2021 11:11:06