Dent Fix Equipment DF-SPR70 Manual De Uso página 6

As soon as the arm is on the riveting machine, push the
locking pin in the hole.
The axle locks itself automatically and must not be
allowed to become unlocked.
The locking pin must be clean with no damage. Do
not use any damaged pin.
Screw in the included extension
CONNECTOR ASSEMBLY
Screw the required connector kit for the chosen riveting procedure into the arm support. Before assembling, check the
matrix and the punch support are correctly in place (see page 3) and screwed tight.
Punch / mandrel support
As soon as the matrix and the punch support are in place, tighten with the wrench
provided. Check that the connection tips are in place after each riveting process. A release is
dangerous and may damage the riveting machine.
6
SELF PIERCING RIVETER 10T NOM DU OU DES PRODUITS
to the piston.
The riveting machine is now ready to use.
Rivet matrix
EN FR
6