Parrot CK3000 Manual Del Usuario página 14

ENGLISH
PAIRING WITH SONY ERICSSON P800 AND P900
When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your
Parrot CK3000. Once this is done, connection between your telephone and your hands-free kit will take place automatically
as soon as the two devices are less than a few meters apart. A 'beep' will be heard, indicating that connection is
established.
Procedure :
Check that the lights on the red and green buttons come on and off according to the position of the ignition key. You should
hear the « Please pair device » instruction for the first time. If not, reset your CK3000 by pressing the green and red button
at the same time.
•
From your phone, open the lid, select the BLUETOOH icon in the task bar.
•
Click SETTINGS, click ADD, (searching).
•
Select the CK3000 icon (bonding in progress).
•
Enter 1234 as PASSKEY, click DONE.
•
"Parrot CK V..." is displayed in the BLUETOOTH® DEVICES list. Click DONE
Known issues with this phone: When finished pairing, wait for the 'beep' prior to initiating a call.
USING PHONE-SPECIFIC FEATURES
Your phone provides phone management and settings from its accessories menu. Also refer to the Standard Features section.
Auto Answer:
•
From your phone, open the lid, select the PHONE shortcut.
•
Click the EDIT option, click PREFERENCES.
•
Click HANDSFREE, select AFTER 5 SECONDS from ANSWERING MODE list.
•
Escape by clicking DONE several times.
Training names :
Your phone lets you assign voice tags to any phonebook entry. With Parrot CK3000, you can use those tags to call your
contacts, press the PICK UP button and say the name after hearing the 'beep'.
•
From your phone, open the lid, select the PHONEBOOK shortcut.
•
Select a name from the list, click the EDIT option, click EDIT CONTACT.
•
Click the VOICE DIALING shortcut, click RECORD, and speak after the tone.
•
Escape by clicking DONE several times
Training names: Record while holding the phone to your ear.
Answer/Busy voice commands :
Your phone lets you pick up or reject incoming calls using vocal commands. You must record the two vocal commands
corresponding respectively to "Answer" and "Busy".
You must first activate the answer/busy voice commands with the following steps:
•
From your phone, open the lid, select the TELEPHONE icon in the toolbar.
•
In the EDIT menu, select PREFERENCES.
•
In the VOICE CONTROL item, activate the option VOICE ANSWER.
Answer/Busy voice commands : Please note that, when this option is activated, you will not hear the rings from incoming
calls from the kit, but only from the telephone itself. Rings from the kit are deactivated to let you use the voice commands
option.
CALLER ID:
Your telephone lets you hear the caller's name, if it is recorded in your phonebook and a voice print assigned to it.
To do this, you need to activate the READ CALLER'S NAME option.
All manuals and user guides at all-guides.com
SONY ERICSSON
14