Troubleshooting Guide - Salter 9034 Instrucciones Y Garantía

9034_IB.qxd:Layout 1 28/4/09 16:58
1. Open the battery compartment on the scale underside.
2. Insert batteries (2 x AAA) observing the polarity signs (+ and -) inside the battery compartment.
3. Close the battery compartment.
4. Scale enters clock set mode.
1.The scale features a 24 hour clock. To enter clock set mode insert new batteries or press and hold
'SET' for 3 seconds.The hour digits will begin to flash.
2. Press 'UNIT/UP' button to set hours. Press and hold to advance quickly.
3. Press 'SET' to confirm. The minute digits will begin to flash.
4. Press 'UNIT/UP' button to set minutes. Press and hold to advance quickly.
5. Press 'SET' to confirm.
OPERATING YOUR SCALE
1. Select kg, st or lb weight mode by pressing the 'UNIT/UP' switch on the underside of the scale.
2. Position scale on firm flat surface. (For use on carpet remove the non-slip pads from the scales feet
and attach the enclosed carpet feet).
3.Tap the platform centre (vibration activates your scale) and remove your foot.
4.Wait until zero is displayed.
5. Step on and stand very still while the scale computes your weight.
6.Your weight is displayed.
7. Step off.
8.Your weight is displayed for a few seconds then the scale will display the clock.
'----' Weight exceeds maximum capacity.
'Lo' Replace battery.
4
All manuals and user guides at all-guides.com
Page 4
PREPARING YOUR SCALE
TO SET CLOCK
WARNING INDICATORS
ADVICE FOR USE AND CARE
Always weigh yourself on the same scale placed on the same floor surface. Do not compare weight
readings from one scale to another as some differences will exist due to manufacturing tolerances.
• Placing your scale on a hard, even floor will ensure the greatest accuracy and repeatability.
• Weigh yourself at the same time each day, before meals and without footwear. First thing in the
morning is a good time.
• Your scale rounds up or down to the nearest increment. If you weigh yourself twice and get two
different readings, your weight lies between the two.
• Clean your scale with a damp cloth. Do not use chemical cleaning agents.
• Do not allow your scale to become saturated with water as this can damage the electronics.
• Treat your scale with care - it is a precision instrument. Do not drop it or jump on it.

TROUBLESHOOTING GUIDE

If you experience any difficulty in the use of your scale:
• Check the battery is correctly fitted.
• Check that you have selected your preference of stones/pounds, kilograms or pounds.
• Check that the scale is on a flat, level floor and not touching against a wall.
• If when you use the scale there is no display at all or if 'Lo' is displayed - try a new battery.
• If '----' is displayed the scale has been overloaded.
GUARANTEE
This product is intended for domestic use only. Salter will repair or replace the product, or any part of
this product, (excluding batteries) free of charge if within 15 years of the date of purchase, it can be
shown to have failed through defective workmanship or materials. This guarantee covers working
parts that affect the function of the scale. It does not cover cosmetic deterioration caused by fair wear
and tear or damage caused by accident or misuse. Opening or taking apart the scale or its
components will void the guarantee. Claims under guarantee must be supported by proof of purchase
and be returned carriage paid to Salter (or local Salter appointed agent if outside the UK). Care
should be taken in packing the scale so that it is not damaged while in transit. This undertaking is in
addition to a consumer's statutory rights and does not affect those rights in any way. For UK Sales and
Service contact HoMedics Group Ltd, PO Box 460,Tonbridge, Kent,TN9 9EW, UK. Helpline Tel No:
(01732) 360783. Outside the UK contact your local Salter appointed agent.
5