Troubleshooting Guide - Salter 9018S Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
9018S_9023_IB_A-W.qxd:Layout 1
25/6/09
1. Open the battery compartment on the scale underside.
2. Remove isolating tab from beneath the battery.
3. Select kg, st or lb weight mode by the switch in the battery compartment.
4. Close the battery compartment.
5. Position scale on firm flat surface. For use on carpet attach the enclosed carpet feet.
OPERATING YOUR SCALE
1. Tap the platform centre (vibration activates your scale) and remove your foot.
2. Wait until zero is displayed.
3. Step on and stand very still while the scale computes your weight.
4. Your weight is displayed.
5. Step off.
6. Your weight is displayed for a few seconds then the scale will switch off.
Err
Weight exceeds maximum capacity.
Lo
Replace battery.
2
11:47
Page 2
PREPARING YOUR SCALE
WARNING INDICATORS
ADVICE FOR USE AND CARE
Always weigh yourself on the same scale placed on the same floor surface.
Do not compare weight readings from one scale to another as some differences will exist due
to manufacturing tolerances.
Placing your scale on a hard, even floor will ensure the greatest accuracy and repeatability.
Weigh yourself at the same time each day, before meals and without footwear.
First thing in the morning is a good time.
Your scale rounds up or down to the nearest increment. If you weigh yourself twice and get
two different readings, your weight lies between the two.
Clean your scale with a damp cloth. Do not use chemical cleaning agents.
Do not allow your scale to become saturated with water as this can damage the electronics.
Treat your scale with care - it is a precision instrument. Do not drop it or jump on it.

TROUBLESHOOTING GUIDE

If you experience any difficulty in the use of your scale:
Check the battery is correctly fitted.
Check that you have selected your preference of stones/pounds, kilograms or pounds.
Check that the scale is on a flat, level floor and not touching against a wall.
If when you use the scale there is no display at all or if 'Lo' is displayed - try a new battery.
If 'Err' is displayed the scale has been overloaded.
GUARANTEE
This product is intended for domestic use only. Salter will repair or replace the product, or any part of
this product, (excluding batteries) free of charge if within 15 years of the date of purchase, it can be
shown to have failed through defective workmanship or materials.This guarantee covers working parts
that affect the function of the scale. It does not cover cosmetic deterioration caused by fair wear and
tear or damage caused by accident or misuse. Opening or taking apart the scale or its components
will void the guarantee. Claims under guarantee must be supported by proof of purchase and be
returned carriage paid to Salter (or local Salter appointed agent if outside the UK). Care should be
taken in packing the scale so that it is not damaged while in transit.This undertaking is in addition to a
consumer's statutory rights and does not affect those rights in any way. For UK Sales and Service
contact HoMedics Group Ltd, PO Box 460,Tonbridge, Kent,TN9 9EW, UK. Helpline Tel No: (01732)
360783. Outside the UK contact your local Salter appointed agent.
3
Tabla de contenido
loading

Este manual también es adecuado para:

9023

Tabla de contenido