Fein MSfo870-1d Instrucciones De Uso página 11

OBJ_BUCH-0000000342-001.book Page 11 Wednesday, March 6, 2019 3:14 PM
Sound emission
Vibrations
Weighted acceleration, in
2
– m/s
2
– ft/s
Measuring uncertainty K , in
2
– m/s
2
– ft/s
REMARK: The sum of the measured emission value and respective measuring inaccuracy represents the
upper limit of the values that can occur during measuring.
Wear hearing protection!
Measured values determined in accordance with the corresponding product standard.
Extension cable.
If the use of an extension cord
WARNING
is required, its length and con-
ductor cross-section must be adequate for the
application in order to prevent a voltage drop
in the extension cord, power loss and over-
heating of the power tool. Otherwise, the
extension cable and power tool are prone to
electrical danger, and the working efficiency is
decreased.
Intended use of the power tool:
Hand-guided angle grinder for use in
weather-protected environments with the
application tools and accessories recom-
mended by FEIN.
MSf843-1c, MSfo849-1c, MSfo852-1c,
MSfo852-1d, MSfo869-1c, MSfo869-1d,
MSfo870-1c, MSfo870-1d:
for dry grinding and cut-off grinding of metal
and stone.
MSfo MSfo MSfo
852-1C 852-1d 869-1c
(**) (**) (**)
4.3 4.6 3.9
14.1 15.0 12.8
1.5 1.5 1.5
4.9 4.9 4.9
Recommended dimensions of extension
cables at an operating voltage of 120 V – sin-
gle-phase a. c., with only one power tool MSf,
MSfo, MSfov connected:
Max. cable length, ft
≤ 100 100
–200
Min. conductor size
A.W.G.
16 14
MSfov852-1, MSfov852-1-180:
for dry grinding of metal and stone.
MSf843-1b, MSfo849-1b:
for dry grinding of metal and stone using elas-
tic sanding pads.
MSf843-1a:
for polishing metal and stone using polishing
tools.
en
MSfo MSfo
869-1d 870-1c 870-1d
(**) (**)
3.9 3.8
12.8 12.5
1.5 1.5
4.9 4.9
Max. cable length, m
200 ≤ 30 30
–300 – 60 –100
Min. conductorcross-
2
section, mm
12 1.5 2.5
11
MSfo
(**)
4.7
15.4
1.5
4.9
60
4.0