Self-timer
Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the
camcorder on. The camcorder initialises in Video mode automatically.
To switch to Self-timer mode (TIMER), press the On/Off/Mode button [2] four times.
Press the record button [9] to enable the self-timer. After the self-timer has been enabled,
the LED [3] and LEDs [11, 15 and 6] flash slowly at the beginning and then fast red and
orange.
The photo is taken 10 seconds after the self-timer is enabled.
The menu
The menu lets you customise the camcorder settings and record parameters.
Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the
camcorder on. The camcorder initialises in Video mode automatically.
To open the menu, press the On/Off/Mode button [2] five times.
Press the record button [9] to open the menu. The following menu is shown:
Press the On/Off/Mode button [2] to select the desired icon or option.
Press the record button [9] to confirm your selection.
SilverCrest SCAA 5.00 A1
English - 101