Button Operation - Digitus DN-170093 Guía Rápida De Instalación

LED indicator
Indicator
Red
Yellow
Yellow
Green
Note: When power on or startup, these indicators will turn on and off sequentially.
Note: On different operation modes, these indicators will indicate differently.
Function Keys
Function key
ESC/OFF
UP
DOWN
ENTER/ON
3. Operations

3.1 Button operation

Button
ON/ENTER
OFF/ESC
ON: The UPS has an active alarm or
fault
The UPS is in Bypass mode.
ON: The UPS is operating normally on
bypass during High Efficiency operation.
ON: The UPS is in Battery mode.
ON: The UPS is operating normally.
To exit setting mode or turn off the UPS
To go to previous selection or turn on the UPS
To go to next selection
To confirm the selection in setting mode or enter
setting mode
• Turn on the UPS: Press and hold ON
button for at least 2 seconds to turn
on the UPS.
• Turn off the UPS: Press and hold this
button at least 2 seconds to turn off
the UPS in battery mode. UPS will
be in standby mode under power
normal or transfer to Bypass mode if
the Bypass enable setting by
pressing this button.
7
Description
Description
Function