Receive A Call - JVC KD-T905BTS Manual De Instrucciones

BLUETOOTH®
• Some Bluetooth devices may not automatically connect to the unit after
pairing. Connect the device to the unit manually.
• When the battery of the connected Bluetooth device runs low, "Device
Name" "LOW BATTERY" appears.
• Refer to the instruction manual of the Bluetooth device for more
information.
Auto Pairing
When you connect iPhone/iPod touch to the USB input terminal, pairing
request (via Bluetooth) is automatically activated.
Press the volume knob to pair once you have confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned on.
– [AUTO PAIRING] is set to [ON]. (Page 19)
16
ENGLISH
BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call:
• KD-T905BTS/KD-T900BTS/KD-T805BTS/KD-TD90BTS:
The buttons will blink in the color you have selected in [RING COLOR].
(Page 18)
KD-T700BT/KD-TD70BT/KD-SR85BT:
The buttons will blink in the blinking pattern you have selected in
[RING ILLUMI]. (Page 18)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected
time. (Page 18)
During a call:
• KD-T905BTS/KD-T900BTS/KD-T805BTS/KD-TD90BTS:
The buttons stop blinking and illuminate in the color you have selected in
[RING COLOR]. (Page 18)
KD-T700BT/KD-TD70BT/KD-SR85BT:
The buttons stop blinking.
• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.