RehabMedic Pro Stim 4 Manual Del Usuario página 57

TENS
The following programs are medical
Conventional antalgic tens
Menstrual pain
Modulated antalgic tens
Knee Pain
Endorphinic tens
Post-surgical pain
Chronic pain
Shoulder pain (Scapulo-humeral syndrome)
Carpal tunnel
Trapezius pain
Rotator cuff inflammation
Low-frequency antalg. tens
Muscle pain
Sciatica
Chronic lumbago
Cervical pain
Bursitis-tendinitis
Bone fractures
Epicondylitis
Osteoarthritis
TOTAL
Because of the presence of clinical programs, this product is a medical device. Therefore it is
certified by the CERMET Body n°. 0476 according to 93/42/CEE directive for medical devices. The
certification covers clinical applications.
MICROCURRENTS
NOTES ON THE USE OF MICROCURRENT PROGRAMS
This paragraph refers to the use of microcurrent programs.
The microcurrent programs differ from normal TENS and EMS programs as follows:
- While conventional electrostimulation (e.g. TENS) uses current in the milliampere range,
microcurrent electrostimulation uses currents in the microampere range that are imperceptible
by humans. During Microcurrents programs, it is normal that the user does not discern any
stimulation.
- When running a Microcurrents program, use exclusively the special gray cables connected to the
outlets of channels 1 and 3. If the cables are not connected or are of the wrong type, it will not
be possible to start the program. Check the connections and the cables.
- The Microcurrents programs have prefixed intensity levels, therefore it is not necessary to set
them. When a Microcurrent program is activated, the electrostimulator automatically brings
the intensity to the correct level. This value should not be altered during the execution of the
program.
- The Microcurrents programs cannot be run in the "2+2 mode" with multiple treatments. If one
tries to select a Microcurrents program in "2+2 mode" , the electrostimulator will emit an error
tone.
If, according to your therapist, you wish to modify the treatment protocol altering the intensity, press
and hold the UP and DOWN button for 3 seconds.
20
55