Intended Use; Connexions; Cables; Electrodes - RehabMedic Pro Stim 4 Manual Del Usuario

- Fast band.
- Fast pad.
- Anal and vaginal probes.
I
NTENDED USE
The after sales service is guaranteed for 5 years. We suggest having a check of the device every
2 years for the maintenance and to ensure the safety. The numbers of treatments depends on the
battery charge. The duration of the battery is 6 months, we suggest replacing it after that period.
The electrostimulators is designed to be used in the following operating environments:
- domestic environment;
- clinics;
- physiotherapy centers;
- rehabilitation centers;
- general pain treatments;
- beauty and sport purposes;

CONNEXIONS

NOTE: For MCR microcurrents use only channels 1 and 3 with the gray cables.
NOTE: For DENERVATED MUSCLES (rectangular, triangular, trapezoidal) current programs use
only channels 1 and 3 with colored cables.
NOTE: For IONOPHORESIS current programs use only channels 1 and 3 with gray cables.
ELECTRODE APPLICATION
Take the electrodes from the original package; all new electrodes have a seal on the package. Be
sure that the device is off. To start connect the two cable plugs to the electrodes, then disconnect
the electrodes from their position and apply them on the skin. To place the electrodes correctly,
see the pictures included in this manual.
After the use, place the electrodes in their original position again.
ATTENTION: Do not unplug the electrodes if the unit is working.
BATTERY: HOW TO CHARGE THE BATTERIES?
The device is supplied with a set of rechargeable nickel-metal hydrate batteries (7 .2V, 1.5Ah),
which have high performance without storage effect. Recharge the batteries when the battery
light on the display indicates ¼.
To charge the batteries, turn off the electrostimulator and disconnect the electrodes, then connect
the electrostimulator to the power supply provided by inserting the plug in the appropriate inlet
(see picture).
Do not use a different charger from the one provided with the device. To replace the
electrostimulator's batteries, contact an authorized service center.
Attention: If the package, the cable or the connector of the power supply unit show signs of wear
or damage, replace it instantly.
38
ACCESSORIES (How to connect the cables)
To connect the cables to the device, plug them in the
intended inlets in the upper part of the unit (see picture).
The inlets are placed exactly under the corresponding
channels
CABLE CONNECTION OUTLETS AND POWER SUPPLY
NOTE: For EMS and TENS currents use indifferently the 4
channels with colored cables.