Manual Mode; Program Mode - Caso Germany Coffee One CJ-633C Manual Del Usuario

The setting is validated automatically.

13.5 Manual mode

If the plug is disconnected to the socket before using:
Plug in the coffee maker, touch the "ON/OFF" button. The display shows a solid blue
light and the coffee maker switches on.
If the plug is connected to the socket before using:
Touch "ON/OFF" button, the LED display is activated, which will show the current
time, then touch "ON/OFF" button again, the light over "ON/OFF" button will be on,
coffee maker start to brew coffee.
When brewing, if touch the "ON/OFF" button, the light over "ON/OFF" button will be
off, and the coffee maker stop brewing.
► At any status, long touch 2S of the "ON/OFF" button , the LED display and all
indicator light will be off, and coffee maker completely stop work.

13.6 Program mode

Touch the "PROG" button: the LED display blink "00 00" with blue color, the point" :"
show a solid blue light. (The display unit goes back into status before if no setting is
entered within 5 seconds).
Touch the "H" button to set the time.
Touch the "M" button to set the minutes.
The setting is validated automatically after 5 seconds.
Touch the "AUTO" button to activate the program function. The light over "AUTO"
button show a solid blue light. At the time programmed, the light over "ON/OFF"
button show a solid blue light and the coffee maker starts to operate.
► When you touch, after programming the time, the "ON/OFF" button (instead of
"AUTO), the light over "ON/OFF" button show a solid blue light and the coffee
maker starts to operate directly.
► You can cancel the program at any time by touching the "AUTO" button. The light
over "AUTO" button will turn off. To reactivate the program, touch the "AUTO"
button again.
► Note on the two operating modes: The coffee maker automatically completely
stops operating after about 70 mins, if you haven't stopped it at the end of the
cycle by long touching the "ON/OFF" button, and the light over "ON/OFF" button
turns off, LED display turns off.
caso 38