Prior To Installation - Husky 31313 Instrucciones De Montaje, Instalación, Funcionamiento Y Mantenimiento

WARNINGS
The distance from the back of the truck cab to the center of the King Pin (Dim
X) should be 4" greater than one-half the trailer width (Dim Y)
If towing with a short bed truck (less than 8ft but longer than 6ft.) Husky Towing recommend the use of a
Husky EZ Roller for increased turning clearance at slow maneuvering speeds.
WARNING
All Products limited to Vehicle Tow Rating; see Vehicle Owners Manual. See
Warranty Information / Tech Support ©2014 Husky Towing Products June 3, 2014-REV 4

Prior To Installation

• Check the Truck Payload and Trailer Weight as defined in Appendix
A (Checking Truck & 5th Wheel Trailer Weight Rating). Never
Overload Truck, Trailer or Hitch.
• This Hitch requires Pre-Installed Base Rails which are bolted
through the Bed of the Truck into brackets which in turn are
fastened to the Truck Chassis. DO NOT INSTALL HITCH BY
FASTENING TO THE FLOOR OF THE PICKUP BOX. The
Pickup Box Floor is not strong enough to carry the loads imposed by
the trailer
th
• This 5 Wheel Hitch is rated for a MAXIMUM Pin Weight of 4,000
lbs and a MAXIMUM Trailer GVW of 16,000 lbs. Exceeding
Maximum ratings may result in death, serious injury or property
damage.
th
Do Not Install this 5
shorter than 6ft. The result of towing with this combination of short bed
th
and 5 Wheel Hitch could be damage to the truck and/or trailer, Serious
Injury or Death.
4 of 61
Wheel Hitch in a Pickup truck that has a bed
www.huskytow.com for