Before You Begin; Safety Reminders - Fizz Scooter Flip 3 Wheel Mini Scooter Manual Del Usuario

WARNING
ALWAYS INSPECT SCOOTER PRIOR TO RIDING. Properly inspecting and maintaining your scooter can reduce the risk of injury.
Always inspect your scooter before riding and regularly maintain it.
CHECK LOCAL LAWS REGRADING SCOOTER USE. Check local laws and regulations to see where and how Ayou may use your
street surfing scooter legally. in many states and local areas, scooter riders are required BY lAW to wear a helmet. Check local
laws and regulations regarding laws governing helmet use and scooter operation in your area.
Brake may get hot from continuous use. Do not touch after braking.

BEFORE YOU BEGIN

Remove contents from box. Remove the foam separators that protect the components from damage during shipping. inspect
the contents of the box for scratches in the paint and dents that may have occurred during shipping. Because your scooter was
assembled and packed at the factory, there shouldn't be any problems, even if the box has a few scars or dents.
Required Tools
We recommend the use of mechanic
grade tools
Riser Handlebar
5 mm Allen wrench/hex key
Steering column
Collar clamp
ASSEMBLY INSTRUCTIONS
1 2
Place the clamp over the Then, insert the handlebar onto
vertical tube of the handlebar. the fork stem.
4 FLIP 3 WHEEL MINI SCOOTER OWNER'S MANUAL
Front Fork
3
Tighten clamp bolts with allen
wrench / hex key.
WARNING
Failure to properly install and tighten the handlebar t-tube steering tube clamp may cause the rider to loose A control and
fall. Assembly must be performed by an adult with mechanical experience. if you do not understand these instructions or the
concept of "tighten securely" seek the assistance of a qualified mechanic.
DO NOT USE NON-STREET SURFING PRODUCTS WITH YOUR SCOOTER.
street surfing scooters have been built to certain design specifications. The original equipment supplied at the time of sale
was selected on the basis of its compatibility with the frame, fork and all other parts. Certain aftermarket products may or
may not be compatible.
CHECK BEFORE RIDING
COLLAR CLAMP
Using the correct size Allen wrench, check that the collar clamp bolt is tightened securely.
WHEELS AND BEARINGS
Under normal circumstances and conditions, street surfing wheels and wheel bearings are maintenance free. nonetheless, it
is the responsibility of the owner or guardian to periodically inspect the wheel for wear and tear, the axle for proper tightness,
and bearing for side-to-side play and loose parts. When a wheel or wheel bearing develops play, this is an indication of excess
Grips
wear and replacement is necessary. Replace immediately with only genuine street surfing wheels. Worn tires/wheels/bearings
are considered normal wear and tear and are not covered by the street surfing Warranty. Wheels other than genuine street
surfing wheels may not be compatible with your street surfing scooter. The use of anything other than genuine street surfing
T-tube
replacement parts may affect your safety.
LOOSE PARTS
Check and secure all fasteners before every ride. Make sure that the steering tube clamps and handlebars spring buttons are
Steering tube
quick-release
locked properly in place before riding.
SAFETY GEAR
Always wear proper protective equipment such as an approved safety helmet, elbow pads and kneepads. Always wear shoes
Deck
(lace-up shoes with rubber soles), never ride barefooted or in sandals, and keep shoelaces tied and out of the way of the wheels.
Brake

SAFETY REMINDERS

CLEANING YOUR SCOOTER
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they may damage the surfaces.
Do not use alcohol, alcohol-based or ammonia based cleaners as they may damage or dissolve the plastic components or
soften the decals or decal adhesive.
Wheels
HOW TO RIDE
Place one foot on the deck, push forward with the other foot. steer. For enhanced cornering, lean slightly into the direction of the
turn. For controlled stops, apply the brake by stepping on the rear fender/brake. Practice applying the brake at various speeds
and in an open area free from obstructions before riding around others.
BE CAREFUL!
You will see people on TV and maybe even people you know doing tricks and stunts. These are people who have been practicing
on scooters for a very long time. Don't try something until you are ready. Avoid steep inclines and don't ride too fast—you can
lose control and fall. skateboard parks are not designed for scooters. never ride in traffic or on the street and watch your
surroundings for pedestrians, bikers, boarders and skaters.
WARNING: Wheelies and other stunt-type riding reduces your ability to maneuver and control your scooter. Take the necessary
precautions, such as wearing appropriate protective gear and practice in an area safe for stunt riding and free from obstructions.
Maintain a hold on the handlebars at all times.
Failure to follow these instructions may damage your vehicle and void your warranty.
English English FLIP 3 WHEEL MINI SCOOTER OWNER'S MANUAL 5