Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Features
Tricolor LED Display
The PosiXtend extended range proximity reader includes a tricolor LED display
(red, green and amber) used to indicate the reader's status. When the orange wire
is pulled low, the red LED will illuminate. When the yellow wire is pulled low, the
green LED will illuminate. When the yellow and orange wires are pulled low, both
LEDs will illuminate producing an amber color.
If a card or key tag is left in the reader's field for more than 5 seconds, the
green and red LEDs will flash alternatively.
Face Light
The PosiXtend extended range proximity reader includes a blue face light. The
elegant face light remains illuminated at all times so the reader can be easily
located in the dark.
Audible Tone
The PosiXtend extended range proximity reader includes a built in beeper that will
emit a tone every time the brown wire is pulled low.
Weather Resistant
The PosiXtend extended range proximity reader can be mounted either indoors or
outdoors.
SwiftRead
After presenting the card, regardless of the card's access status, the LED will flash
to indicate that the reader has read the card and the data was sent to the
controller. After the SwiftRead period, the controller resumes control of the LED as
usual.
Diagnostic Test
All PosiXtend extended range proximity readers perform a self-diagnostic test
during power up to ensure proper operation and to verify the integrity of the
internal hardware. Every time power is applied to the reader, the green LED will
flash twice to indicate the diagnostic test was performed and no problems were
found. If the reader determines a problem after performing the diagnostic test, the
green and red LEDs will toggle on and off and the beeper will emit a pulsing tone.
8 Features
Tabla de contenido
