Keep warm function
The plate-warming plate is used for melting chocolate or butter,
and for keeping food warm.
To activate
Select the required hotplate using the Tipp control.
1.
Within the next 5 seconds, press the
2.
The
indicator lights up.
–
The "keep warm" function has been turned on.
Care and cleaning
The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition
Hob
Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cold enough
before attempting to clean it.
Only use cleaning products specifically designed for glass-
ceramic hobs. Follow the instructions provided on the
packaging.
Do not use:
Abrasive products
■
heavy-duty cleaners, like oven sprays and stain removers
■
Pads that may scratch
■
High-pressure or steam cleaners
■
Glass scraper
Remove dried-on food remains using a glass scraper.
Release the scraper safety catch
1.
Use the blade to clean the hob surface
2.
Do not attempt to clean the hob surface with the base of the
scraper. This could result in scratching.
Fixing malfunctions
Malfunctions are generally caused by minor faults. Before
contacting the Technical Assistance Service, ensure you have
read the following recommendations and warnings.
Indicator
Malfunction
none
The electric power supply has been cut off. Check other electrical appliances to check whether there has been a
The appliance has not been properly con-
nected following the connection diagram.
Electronic system malfunction.
The control panel is wet or an object is
"
flashing
resting on it.
* If the indicator persists, call the Technical Assistance Service.
Do not rest hot pans on the control panel.
32
–
symbol.
Measure
power cut.
Check that the appliance has been connected properly according to
the connection diagram.
If the malfunction is not resolved by the above checks, contact the
Technical Assistance Service.
Dry the control panel area or remove the object.
To turn off
Select the required hotplate using the Tipp control.
1.
Press the
symbol.
–
2.
The
display turns off.
–
After five seconds, the hotplate turns off and the residual heat
indicator appears.
ã=
Risk of injury!!
The blade is extremely sharp. Risk of cuts. Protect the blade
when not in use. Replace the blade immediately when any
imperfections are found.
Care of the appliance
Apply an additive to protect and preserve the hob. Follow the
advice and warnings provided with the product.
Hob frame
In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
■
The Tipp control
For cleaning the Tipp control, warm water and a little soap is
recommended. Do not use abrasive or corrosive cleaning
products. Do not clean the Tipp control in a dishwasher or in
washing up water. Otherwise, it could be damaged.