GRAPHITE 58G602 Instrucciones De Uso página 78

2. Switch
3. Adaptor
4. Clamp
5. Dust extraction add-on
6. Fixing screw with washer
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY / SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Various working tips
2. Sanding paper (80#)
3. Dust extraction add-on with adaptor + clamp
4. Hexagonal key
5. Transport case
SELECTION OF WORKING TOOL
Below table presents examples of use for various working tools.
Name
HSS blade for
metal
Half-round HCS
wheel for wood
HCS blade for
wood
Half-round
wheel with
tungsten coat
Delta sanding
pad
Stiff scraper
- 6 pcs
- 5 pcs
- 1 set
- 1 pce
- 1 pce
PREPARATION FOR OPERATION
Type of material
Metal (e.g. nails,
bolts, small sections),
non-ferrous metals
Wood, wood-based
materials, plastics
Wood, wood-based
materials, plastics
Cement joints, soft
ceramic tiles, hard
plastics and other
materials
Wood, wood-based
materials, abrasive
materials
Linings, floors,
ceramic tiles
12
Intended use
Small dividing and
plunge cutting
Dividing and plunge
cutting in corners
and hardly accessible
places, near surface
Dividing and plunge
cutting in corners
and hardly accessible
places, near surface
Cutting short and
cutting off close to
edges, in corners and
hardly accessible places
Sanding in hardly
accessible places and
in corners on a hard
ground
Scraping soft materials
on a hard ground
Example
Cutting narrow sections
short, cutting joining
elements, e.g. clamps
Narrow plunge cuts in
solid wood, e.g. for air
grates
Cut outs in furniture
boards, cutting cove bases
short, plunge cutting for
fitting floor panels
Removal of joint, cutting
holes in ceramic tiles and
plastics
Removal of mortar and
glue for ceramic tiles,
sanding solid wood,
polishing
Removal of mortar
residues, glue for lining or
ceramic tiles