Setting The Temperature; Dry Ironing - Domo DO7036S Manual De Instrucciones

www.domo-elektro.be

SETTING THE TEMPERATURE

• Always check first if there is a label with ironing instructions attached to the
article to be ironed. Always follow the instructions on that label.
• If there are no ironing instructions to be found, but you know what kind of
fabric the article is made of, then follow the table below for the recommended
temperature.
• If a certain finish is added to the fabric (shiny, wrinkled, structure,...), then iron
the fabric at a lower temperature than indicated in the table below.
• The iron heats up faster than it cools down. Therefore be sure to iron the articles
that require the lowest temperature first, like synthetic fabrics.
• If a fabric is made out of different kinds of fibres, then always choose the lowest
temperature to iron this combination of fibres.
• Silk and other shiny fabrics need to be ironed inside-out.
• Velours and other fabrics that can become shiny should be ironed in one direction
with slight pressure. Always keep the iron moving.
• Never iron over zippers or other metal objects in a garment. This could damage
the soleplate. Always iron around such objects.
Symbol

DRY IRONING

1. Make sure that the handle is clicked up.
2. Slide the on/off button for steam to the 'off' position.
3. Plug in the iron.
4. Set the temperature control disc to 1 dot •, 2 dots •• or 3 dots
•••, according to the recommended temperature.
5. The light will go on as a sign that the iron is switched on.
6. Place the iron upright on its support.
7. The indicator light will go off when the selected temperature
has been reached. The iron is now ready for use.
Fabric
synthetic fabric/silk
wool, polyester
cotton
linnen
This symbol means that the fabric should not be ironed!
37
DO7036S
Steam