Tripp-Lite P960-001-M2 El Manual Del Propietario página 4

Installation
1. Remove the cover from the P960-001-M2
2. Depending on the size of your drive, insert
3. Connect your drive by inserting it into
4. Using the included screw, secure the drive
5. When the drive is fully installed, place the
6. Connect the unit to the SATA port on your
7. Your drive is now ready for use.
16-12-139-933619.indb 4
unit to expose the SSD drive tray and
M.2 NGFF (B-Key) connector.
the included nut into the circular slot at the
42 mm, 60 mm or 80 mm lines.
the M.2 NGFF connector. Keep the drive
at a low angle to minimize stress on the
connector.
by screwing it into the nut.
cover back on to protect it from dust and
other contaminants.
computer.
4
1/5/2017 12:14:48 PM