Maintenance / Service - Skil 4951 Manual Original

• Operating the tool
! securely clamp the workpiece
- mark the cutting line on the workpiece
- connect plug to power source
- hold the tool with one hand on handle D 2 and the
other on the insulated barrel grip E 2
- switch on the tool
- guide the tool along the marked cutting line
- keep footplate F 2 firmly against the workpiece to
minimize counter-force and vibration
• Holding and guiding the tool
! while working, always hold the tool at the grey-
coloured grip area(s) 9
- keep ventilation slots J 2 uncovered
- do not apply too much pressure on the tool; let the tool
do the work for you
! ensure that the saw blade extends beyond the
work throughout the stroke q
• Adjusting effective sawing depth w
- use both fastening bolts G for sliding footplate F
forward/backwards in order to enlarge/reduce the
effective sawing depth
APPLICATION ADVICE
Plunge cutting e
•
Plunge cuts can be made in wood and other soft
materials without pre-drilling a hole
- use a thick saw blade
- mount the blade with the teeth facing upward
- mark desired cutting line on the workpiece
- tilt the tool so that the blade does not touch the
workpiece
- switch on the tool and carefully engage the moving saw
blade into the workpiece
- after the blade has penetrated through the workpiece
continue sawing along the marked cutting line
! do not make plunge cuts in metal materials
• Use the appropriate saw blades r
• When cutting metals, lubricate saw blade regularly with
oil
• Splinter-free cutting
- cover cutting-line with several layers of wide tape
before cutting
- always face the good side of the workpiece down
• For more information see www.skil.com

MAINTENANCE / SERVICE

• This tool is not intended for professional use
• Always keep tool and cord clean (especially ventilation
slots J 2 )
! disconnect the plug before cleaning
• If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of the
tool are listed on www.skil.com)
Be aware that damage due to overload or improper
•
handling of the tool will be excluded from the warranty
(for the SKIL warranty conditions see www.skil.com or
ask your dealer)
ENVIRONMENT
• Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 5 will remind you of this when the need for
disposing occurs
NOISE / VIBRATION
• 4951
Measured in accordance with EN 62841 the sound
pressure level of this tool is 85.0 dB(A) and the sound
power level 96.0 dB(A) (uncertainty K = 5 dB), and the
vibration ✱ (triax vector sum; uncertainty K = 1.5 m/s²)
cutting board 22.7 m/s²
✱
cutting wooden beams 17.6 m/s²
✱
• 4961
Measured in accordance with EN 62841 the sound
pressure level of this tool is 88.0 dB(A) and the sound
power level 99.0 dB(A) (uncertainty K = 5 dB), and the
vibration ✱ (triax vector sum; uncertainty K = 1.5 m/s²)
cutting board 19.0 m/s²
✱
cutting wooden beams 19.1 m/s²
✱
• The vibration emission level has been measured in
accordance with a standardised test given in EN 62841;
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for different applications, or with different
or poorly maintained accessories, may significantly
increase the exposure level
- the times when the tool is switched off or when it is
running but not actually doing the job, may significantly
reduce the exposure level
! protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
b
Scie sabre
INTRODUCTION
• Cet outil est conçu pour la découpe du bois, du plastique,
du métal et des matériaux de construction, ainsi que pour
l'élagage et l'ébranchage ; il convient pour les coupes
droites et curvilignes
• Cet outil n'est pas conçu pour un usage professionnel
• Lisez et conservez ce manuel d'instruction 3
CARACTERISTIQUES TECHNIQUES 1
ELEMENTS DE L'OUTIL 2
A Interrupteur de marche/arrêt et réglage de vitesse
B Serrage de lame
9
4951/4961