Using Your Humidifier - Kenmore 758.15412010 Manual De Uso

Using Your Humidifier
Refill Display Function
For maximum run time bottle and base
should be filled. When bottle and base
are empty the display alternates the
room humidity reading and "F" (FILL),
indicating additional water is required.
Dry Out Mode
At this time the unit will automatically
switch into the DRY OUT mode and
continue to run on Whisper for a two
hour period.
NOTE: During this time the room
humidity level will continue to be
monitored and the humidifier will cycle
the fan on and off until the filter is
completely dry. The fan will shut off
leaving you with a dry humidifier that is
less prone to mold and mildew growth.
If DRY OUT is not desired, refill the
humidifier with water.
NOTE: Once the dry out cycle is
complete, the fan will shut off.
Check Filter Indicator
The ability of any humidifier to
efficiently supply humidity output
relies heavily on the condition of the
filter. As the filter loads with
impurities it gradually loses its
wicking capability. When this
happens, moisture output is reduced
and the humidifier has to work
longer to satisfy the selected setting.
This humidifier has a check filter
reminder timed to appear after 720
hours of operation. When the CF
message is displayed, disconnect
the power cord and check the
condition of the filter. If a build-up
of deposits or severe discoloration is
evident replace the filter to restore
maximum efficiency. The CF
message is reset when the humidifier
is plugged back in.