Idiomas disponibles
Idiomas disponibles
SPECIFICATION OF THE PRODUCT
The grass trimmer is used for work in household. This is designed for cutting the grass in places, which are inaccessible to con-
ventional lawn mowers, for example, near the walls of buildings, fences, trees and shrubs, paths, edging paths, lawns, etc. Grass
cutting is carried out by means of a rotating cutting line made of plastic. For cutting of shrubs, woody plant shoots, etc. you should
use a metal blade. Correct, reliable, and safe operation of the device is dependent on its proper use, therefore:
Prior to working with the device, you should read all the instruction and keep it around.
For any damages or injuries caused by the tool misuse, failure to comply with safety regulations and instructions of this manual,
the supplier is not responsible. The tool misuse causes also the loss of user's rights to the guarantee and warranty.
EQUIPMENT
The grass trimmer is delivered in a complete staye, but before its first use it should be assembled.
Along with the device there are supplied:
- spool with the cutting line
- blade
- belt - harness
TECHNICAL DATA
Parameter
Catalog number
Weight
Fuel tank capacity
Cutting width - cutting line
Cutting width - the cutting edge
Cutting line diameter
Length of cutting line on the spool
Thickness of the blade
Engine
the number of cylinders
the number of strokes
cooling
Spark plug type
Engine displacement
Engine power
The maximum recommended engine speed with the (blade / trimmer line)
The maximum rotational spindle speed (blade / cutting line)
Recommended idling speed
Fuel consumption at max. engine power
Noise.
Acustic pressure
power LwA
Vibration level (blade / trimmer line)
SAFETY INSTRUCTIONS
IMPORTANT Read carefully before starting the operation. Keep for future use.
Every time when in the description appears the term: "device" it should be treated as a "grass trimmer".
PREPARATION
THE DEVICE MAY BE THE CAUSE OF SERIOUS INJURY. Carefully read the instructions manual. Become familiar with the cor-
rect handling, operation, maintenance, starting and stopping the device. Become familiar with the correct handling of all controls.
Never allow children to operate the device.
Attention! National law may limit the ability to use the device.
Be careful during the cutting near live wires.
Use only the accessories provided by the manufacturer: spool with the cutting plastic line or metal blade. Do not use other equip-
ment than those provided for by the manufacturer, such as discs equipped with the cutting chain. Do not substitute the cutting
O R I G I N A L
GB
Unit
[kg]
[cm3]
[mm]
[mm]
[mm]
[m]
[mm]
[cm3]
[kW]
[min-1]
[min-1]
[min-1]
[kg/h]
[dB (A)]
[dB (A)]
[m/s2]
I N S T R U C T I O N S
Value
YT-85002
7,9
1000
430
255
2,4
4
1,4
1
2
air
L8RTC
51,7
1,4
9600 / 8600
7100 / 6300
3280
0,780
94,35 ± 2,5
108,67 ± 2,5
4,512 ± 1,5 / 4,319 ± 1,5
15
