Equipment Setup And Use; Prior To Use; Setup - Hillrom O-ABSLW Manual Del Usuario

INSTRUCTIONS FOR USE
3

Equipment Setup and Use:

Prior to use:

a. Inspect the product looking for any visible damage or sharp edges that could
be caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped dry
prior to each use.

Setup:

a. Hold the Armboard in a horizontal position.
b. Tilt the end of the board up approximately 2
to 3" (5 to 8 cm). Hook the upper jaw of the
mount over the table rail and allow the end
of the board to return to horizontal position.
The latch should engage the bottom edge
of the rail and the Armboard should now be
fastened to the table. Lift the end of the
board to ensure that it is locked to the rail.
Document Number: D-720027
Version: C
Page 13
Issue Date: 13 MAR 2020
Ref Blank Template: 80025117 Ver. F