Boot And Shutdown; Connect With Pc - Wolder miTab HOP! Manual De Usuario

Connection for data transmission from/to PC (e.g. music, photos, videos) or
Connection of USB storage media and USB devices such as mouse or keyboard.
5. DC jack: Connect with 2.5mm DC- 5V/2A adaptor to charge the built-in
rechargeable battery here.
6. MicroSD card： Insert microSD and microSD HC cards here.
7. Volume+/-
8. Reset pin hole
Reset the device in case of malfunction (use a paper clip or similar and carefully
press the key in the pin hole.
9. Speaker

Boot and Shutdown

Boot: Press and hold the power key, the system will enter the boot process.
System has been started, entering the Android system.
Shutdown: Press the power key, pop-up device options, select Power off, Click
OK, you can safely shut down.

Connect with PC

From the Micro USB (OTG) interface of the device, you can connect with PC using
the Micro USB cable provided with the device. USB Data transferring is ready. You
can manage the files through the PC.
When your device is connected successfully, you can see the following icon
in the notification area of the status bar
Then click
Click
Note: The device also supports FAT32 format for external devices, for example U
disk, Micro SD card to Transfer data.
to enter the next step.
. Then, the device can transfer data to and from the PC.
.
7