Getting Started; System Configuration; On/Off/Standby; Reset - Wolder miTab LINE Manual De Usuario

Wi-Fi
Battery
a) Getting started

System Configuration

Operating system: Windows 7/Vista/XP/2K/ME/98 (need to install driver)/ubuntu 9.0 and
above/Mac OS 10
CPU: Pentium 133MHz and above.
RAM: Minimum 32 MB.
Hard disk free space: Minimum 100 MB.
Video card: 640x480 or above with minimum 16 bit colour.

ON/OFF/Standby

ON: Pressing Power key, the player displays start-up picture and then enters home
screen.
OFF: Press and hold Power key for 5s on the home screen, the system will prompt
whether to power off device, then press 'YES', the device will power off normally.
Power saving and standby mode: With the device switched on, press power key to enter
power saving and standby mode, to exit power saving mode press power key again to
lighten the screen, then follow instructions to unlock the screen.

Reset

Press RESET key over 8s to restart the tablet if it has crashed .

PC Connection and Data Transfer

The tablet is connected to a PC using a USB cable. Once the cable is connected, the USB
icon will appear on the lower right side of the status bar indicating that the tablet is
now connected through USB. As follows:
V. 1.0
The device is connected to the Internet through a Wi-Fi connection. The more
number of signal bars in the icon, the stronger the signal.
Shows the battery level or charging status.
Page 7