Battery Management And Charge; Connection With Pc - Wolder miTabMINT Manual De Usuario

2. First use

2.1 Battery management and charge

Before first use, please make sure the device's battery is fully charged
Just need to connect the adaptor or USB interface, then you can charge
The first two times charging please charge for 6 hours, after that you just need 4
hours to charge.
【Remark】: This tablet using Built-in type polymer battery, Charger must be
standard adaptor (Input: AC110~240V 50/60Hz), this device include DC charging.
USB interface can charge, Choose USB interface to charge
During the charging, the battery icon will scroll
When finished charging, battery icon will become green and stop scrolling
In order to prolong the service life of the machine, suggest using out the battery
power before recharging it
【Remark】: 1. If you don't use this tablet for a long time, to avoid power
consumption damage, please charge/use the battery once a month.
2. After low battery shut down, connect DC adaptor. Device will remind of
low battery charging. You need to wait some time until the battery has enough
power to enter into main menu.
3. Device charging should be in standby status for reach normal charging
time. Device screen power consumption may cause longer charging time.

2.2 Connection with PC

Use USB cable to connect device to PC, device will pop up the USB connection
window, click Turn on USB storage to connect to PC.
4