Wall-Mount Adjustment (Sold Separately) (Le52F9) - Samsung LE52F9 Instrucciones Del Propietario

Wall-mount adjustment (Sold separately) (le52F9)

once the wall mount is installed, the position of your tV can be easily adjustable.
tV rear Panel
1. Press the menu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
enter/oK button.
2. Press the ▲ or ▼ button to select "Wall-Mount Adjustment",
then press the enter/oK button.
. Adjust to the desired position using the ▲,▼,◄,► buttons.
. Press the exIt button to exit.
If you press an arrow button when no OSD is displayed on the
TV screen, the Adjustment screen appears.
When you turn the power off, your TV moves to the initial
installation position.
When you turn the power on, your TV moves to the last
remembered position you adjusted.
The auto wall mount will not work when Anynet+ is operating.
using the remote Control buttons
button
green
button
red yellow
button button
For installation, refer to the Installation Manual provided.
For product installation and the installation and moving of the wall mount, make sure to consult a
specialized installation company.
This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer
SerVICe Cable (not supplied)
operations
Wall-mount angle
Tilt Up, Tilt Down, Move right, Move left
adjustment
Reset Moves to the initial installation position
Remembering the 1. Select the Direction buttons of the remote control.
2. Press the red button (Select Position 1).
position and
3. Adjust the set to a desired position following the wall mount owner's
moving to the
manual.
remembered
4. The position you adjusted last is memorized as Position 1.
position
5. By using the green button (Select Position 2) and the yellow button
(Select Position 3), you can save positions according to the
procedures above.
6. You can save 3 respective positions. To the red button (Select
Position 1), green button (Select Position 2) and yellow button
(Select Position 3). If you press a button after saving, the set
automatically moves to that saved angle.
7. If you additionally move the set from a saved position, the last
position is saved.
english - 1
auto Wall-mount
tV
Position1
Position
adjust
Setup
more
Wall-mount adjustment
energy Saving : off
hDmI black level : low
Feature Demo : off
PIP
SW upgrade
move enter return
Wall mount adjusment
1 2 
Center exit
InFo




