Tabla de contenido
PEDAL INSTALLATION
1. CLEAN CRANK ARM THREADS AND APPLY A SMALL AMOUNT OF GREASE
Use a cloth or brush to remove old grease before applying new grease.
2. IDENTIFY THE LEFT AND RIGHT PEDALS
The "wahoo" logo reads le -to-right to help identify each pedal (shown below).
CAUTION
Right pedals install clockwise and le pedals install counterclockwise.
Improper installation or cross threading can cause damage to your pedals
or crank arms.
3. THREAD THE PEDALS ONTO THE CORRECT CRANK ARM
Use an 8mm Allen Wrench to ensure a snug fit. Titanium spindles will
require a 6mm.
Recommended tightening torque:
30 Nm.
FOR FULL FEATURE DETAILS AND
USER INSTRUCTIONS, GO TO:
WAHOOFITNESS.COM/INSTRUCTIONS/SPEEDPLAY
Le Pedal
Right Pedal
V.1
Tabla de contenido
