Package Contents; Description (Fi G. A) - DeWalt D51321 Manual Del Usuario

Ocultar thumbs Ver también para D51321:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
E N G L I S H
• Never actuate the fastener driving tool into free
space.
• Consider the conditions in the work area.
Fasteners can penetrate thin workpieces or slip
off corners and edges of the workpiece, and thus
put people at risk.
• Do not drive fasteners close to the edge of the
workpiece.
• Do not drive fasteners on top of other fasteners.
• In the work area, carry the tool using only one
handle, and never with the trigger actuated.
• Unload the tool after use and before performing
any maintenance.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Pneumatic tool with safety yoke.
Do not use the tool on a ladder.
Compatible fastener angles.
Maximum number of fasteners in
magazine.
Fastener length.
Fastener diameter.
Max. operating pressure.
Tool weight.
22
DATE CODE POSITION (FIG. A)
The Date Code (20), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture

Package contents

The package contains:
1 Nailer
1 Sequential action trigger
1 Safety glasses
1 Hex key 3 mm
1 Hex key 4 mm
1 Instruction manual
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fi g. A)
1 Trigger
2 Lock-off switch
3 Depth adjustment wheel
4 Contact trip
5 Magazine
6 Magazine latch
7 Nail guide door
8 Shingle gauge
9 Air fi tting
INTENDED USE
Your nailer D51321 has been designed for driving
fasteners into wooden workpieces.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
This pneumatic nailer is a professional power tool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators
use this tool.
ASSEMBLY AND ADJUSTMENT
Trigger selection (fi g. B)
These tools are assembled with a bump action
trigger. A sequential action trigger is also included
with the original packaging. For defi nitions of "bump
action" and "sequential action", see below.
Tabla de contenido
loading

Tabla de contenido