Battery Care; Battery Disposal - Dremel Micro 8050 Instrucciones De Funcionamiento Y Seguridad

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

DM 2610031565 05-14-v8_8050 5/13/14 11:45 AM Page 8
When
W RNING
charger, keep it away from
metal objects. For example, to protect
terminals from shorting, DO NOT place tool in
a tool box or pocket with nails, screws, keys,
etc. Fire or injury may result.
Do not attempt to disas-
W RNING
semble the tool or remove
any component projecting from the tool.
Fire or injury may result. Prior to disposal,
protect exposed terminals with heavy
insulating tape to prevent shorting.
LITHIUM-ION BATTERIES
If equipped with a lithium-ion battery, the battery
must be collected, recycled or disposed of in
an environmentally sound manner.
"The EPA certified RBRC
Battery Recycling Seal on the
lithium-ion (Li-ion) battery
indicates Robert Bosch Tool
Corporation is voluntarily
participating in an industry
program to collect and recycle these batteries
at the end of their useful life, when taken out
of service in the United States or Canada. The
RBRC program provides a convenient
alterative to placing used Li-ion batteries into
the trash or the municipal waste stream, which
may be illegal in your area.
Please call 1-800-8-BATTERY for information
on Li-ion battery recycling and disposal
bans/restrictions in your area, or return your
batteries to a Skil/Bosch/Dremel Service
Center for recycling. Robert Bosch Tool
Corporation's involvement in this program is
part of our commitment to preserving our
environment and conserving our natural
resources."

Battery Care

tool
is
not
in

Battery Disposal

8
DO NOT PUT TOOL INTO FIRE OR
ExPOSE TO HIGH HEAT. It may explode.
Battery Removal Instructions
Run motor until battery is
C UTION
completely discharged before
attempting to remove battery from your tool.
1. Remove collet nut and collet.
2. Remove the six (6) housing screws with a
phillips screwdriver.
3. Remove housing cover by lifting upward at
backend of tool.
4. Disconnect lead wires from battery.
5. Wrap heavy insulating tape around battery
terminals or enclose in a sealable plastic
bag to prevent possible shorting.
6. Dispose of battery through your local waste
removal authority or a Skil/Bosch/Dremel
Service Center.
Tabla de contenido
loading

Tabla de contenido