Fuel Gauge; Important Charging Notes - Dremel Micro 8050 Instrucciones De Funcionamiento Y Seguridad

DM 2610031565 05-14-v8_8050 5/13/14 11:45 AM Page 17

FUEL GAUGE

This tool is equipped with a fuel gauge that
tells you how much charge your battery has.
A fully charged battery is indicated when the
light is green. As the battery discharges, the light will turn orange. When the light is red,
the battery is almost empty. When the
battery is dead, the tool will automatically
turn off. This will be a sudden stop as
opposed to a gradual winding down of the
tool. Simply recharge the tool and reuse.

IMPORTANT CHARGING NOTES

1. The charging base was designed to charge
the tool only when the battery temperature is
between 32˚F (0˚C) and 113˚F (45˚C). If the
tool is too hot or too cold, the charging base
will not charge the tool. (This may happen if
the tool is hot from heavy use). When the
tool temperature returns to between 32˚F
(0˚C) and 113˚F (45˚C), the charging base
will automatically begin charging.
2. A substantial drop in operating time per
charge may mean that the battery is nearing
the end of its life and should be replaced.
3. Remember to unplug the power adapter
during storage period.
Charging Tool
Green Light - 100% charge remaining.
Orange Light – 50% charge remaining or
the tool is being used in heavy applications
(low battery voltage due to current draw).
Red Light - 25% charge remaining.
Red Flashing Light - tool is about to shut off
or battery is too hot or too cold for use. Turn
tool off and let battery return to normal
operating temperature before resuming use.
4. If tool does not charge properly:
a. Check for voltage at outlet by plugging in some other electrical device.
b. Check to see if outlet is connected to a
light switch which turns power "off" when
lights are turned off.
c. Check charging base and power supply
terminals for dirt. Clean with cotton swab
and alcohol if necessary.
d. If you still do not get proper charging, take
or send tool to your local Dremel Service
Center.
Note: Use of power supply not sold by Dremel
will void the warranty.
17