Dremel VRT1 Instrucciones De Funcionamiento Y Seguridad página 13

Dremel Accessories
Use only Dremel
performance accessories that
are 2" or less in daimeter and rated at least WARNING
35,000/min. Other accessories are not designed
for this tool and may lead to personal injury or
property damage.
The number and variety of accessories for the
Rotary Tool are almost limitless. There is a
category suited to almost any job you might have
to do — and a variety of sizes and shapes within
each category which en ables you to get the perfect
accessory for every need.
COLLETS
If you expect to use a variety of accessories, we
recommend that in the beginning you purchase a
complete set of four collets. Store these so that
you will have the proper size of collet for any
accessory or drill bit you want to use. Currently,
the 1/8", 3/32",1/32" and 1/16" collets
accommodate all of the avail able Dremel
accessories. 1/8" collets are included in most
rotary tool kits.
MANDRELS
A mandrel is a shank with a threaded or screw
head, which are required when you use polishing
accessories, cutting wheels, sanding discs, and
pol ish ing points. The reason mandrels are used is
that sanding discs, cutting wheels and similar
, high-
®
accesso ries must be replaced frequently. The
mandrel is a per manent shank, allowing you to
replace only the worn head when necessary, thus
saving the expense of replacing the shaft each
time.
Screw Mandrel No 401
This is a screw mandrel used with the felt
polishing tip and felt polishing wheels. 1/8" shank.
Small Screw Mandrel No 402
This is a mandrel with a small screw at its tip, and
is used with emery and fiberglass cutting wheels,
sanding discs and polishing wheels. 1/8" shank.
EZ Lock Mandrel No 402
The Dremel EZ Lock makes accessory changes
easy as PULL - TWIST - RELEASE. The one-
piece mandrel design simplifies the process of
changing cutting wheels, buffs and detail abrasive
brushes (EZ Lock compatible accessories).
Available in many shapes, high speed cutters are
used in carving, cutting and slotting in wood and
plastics. These are the accessories to use for
freehand carving in wood or plastic, and for
precision cutting. Made of high quality steel. 1/8"
shank.
These are tough, long-lived cutters for use on fired
ceramics and other very hard ma terials. 1/8"
shanks.
This group has a wide variety of sizes and
shapes, and are made for intricate work on
ceramics (greenware), wood carvings, jewelry and
scrimshaw. They often are used in making
complicat ed printed circuit boards. They should
not be used on steel and other very hard materials
but are excellent on wood, plastic and soft metals.
1/8" shank.
13
High Speed Cutters
Tungsten Carbide Cutters
Engraving Cutters