CASUALPLAY protector FIX Instrucciones De Uso página 19

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 4
• Next press either the left or right button (fig. 07) and, while keeping it pressed
down, extend the length of the connector bars (fig. 08).
• Put the PROTECTOR FIX in the back seat of the car (fig. 09) in front of the
ISOFIX hooks.
• Push the safety seat with both hands in the direction towards the anchorages
until a "click" tells you that the attachment on both sides has been made
(fig. 10).
• Check the correct installation of the system, by verifying that a green line
appears on the upper part of the connector unlocking devices (fig. 11). If a red
line appears in one of the connectors, it indicates that it is not correctly attached.
Re-start the operation.
• Finally, adjust the free play between the PROTECTOR FIX and the back of the
car by pressing either of the side buttons on the base, and pushing the safety
seat firmly towards the back of the car (fig. 12).
Place the child in the PROTECTOR FIX seat (see illustrations 14 - 17)
• Adjust the headrest to its maximum height (fig. 14 - 15) and pass the diagonal
part of the belt through the headrest runner. Re-adjust the headrest to the
appropriate position for the height of the child.
• Fasten the seat belt by passing it over the PROTECTOR FIX so that the lap strap
is as low as possible and the diagonal strap holds the child firmly (fig. 16).
• Fasten the belt and check that the lap strap is underneath both arm rests (area
marked in red) and the diagonal strap is above the arm rest next to the buckle
(fig. 17). Adjust the height of the headrest so that the diagonal strap of the car
seat belt passes over the chest of the child and not across his/her neck.
Adjusting the PROTECTOR FIX height (see illustrations 18 - 19)
• The PROTECTOR FIX is height adjustable to adapt to the growth of the child
(fig. 18). Once it is fitted in the car with the child, adjust the height of the
PROTECTOR FIX so that the belt never goes across the child's neck.
• Press the button behind the top of the headrest to adjust its height (fig. 19).
Adjusting the PROTECTOR FIX base (see illustrations 20 - 21)
• The base of the PROTECTOR FIX is adjustable according to the growth of the
child.
• When seated inside, adjust the base according to the length of the child's legs.
• Turn the selector knob to the left (fig. 20) and move to modify the length of the
base according to the legs of the child (fig. 21).
17
Tabla de contenido
loading

Tabla de contenido