General Instructions - CASUALPLAY protector FIX Instrucciones De Uso

collision are made safe or securely fastened.
• We guarantee the safety of the device when it is used by the first-time buyer.
• We advise against using second-hand products for safety purposes.
• Be extremely careful when installing the child safety seat, since installing it
correctly can save the life of your child if you have an accident (follow the
manufacturer's instructions correctly).
• It is important that the rest of the passengers in the vehicle are also strapped in
with a seat belt. If not, they can be thrown around in an accident and damage
the baby.
• Check the different parts of the seat regularly.
• The seat should not be used without its cover.
• Only the cover supplied by the seat manufacturer should be used, as it is an
important part of the product.
• You are responsible for the child's safety.
• The upholstery should be hand washed, using mild soap and warm water; or
machine washed at a maximum temperature of 30º C and WITHOUT SPINNING.
Do not use chemical cleaners (dry-cleaning).

GENERAL INSTRUCTIONS

PROTECTOR FIX Assembly (see illustrations 01 - 04)
• The PROTECTOR FIX arrives disassembled for easier transport (fig. 01)
• Position the back so that the clamp is between the metallic structure of the
PROTECTOR FIX base (fig. 02 - 03), never behind it (fig. 04). A "characteristic
click" confirms that the attachment has been made successfully.
WARNING: Never use PROTECTOR FIX without the back section as it has been
accredited as a unit. Using it without the back section will affect the health of the child.
PROTECTOR FIX Installation inside the car (see illustrations 05 - 12)
• PROTECTOR FIX must be installed in the back seat of the vehicle with a three
point seat belt and the PLAYFIX connectors.
• Remove the headrest from the seat where you are going to install the seat (fig. 05).
• Position the clips in front of both ISOFIX slots, which are situated between the
seat and the backrest (fig. 06).
NOTE: If the vehicle came supplied with these connectors, it is not necessary to
assemble them.
16