Tripp-Lite B118-002-UHD Manual Del Usuario página 5

Installation
3
Connect an available Output port on the splitter to the HDMI input port
of your display.
Note: The length of the HDMI cable connecting the splitter to the display must
not exceed 23 ft. (7 m).
4
Repeat step 3 for the remaining Output ports on the splitter.
5
Connect the included power supply to the splitter, then plug it
into a Tripp Lite Surge Protector, Power Distribution Unit (PDU), or
Uninterruptible Power Supply (UPS).
6
Turn on the power to the HDMI source, splitter, and displays.
Cascade Installation
The number of connected monitors can be expanded by cascading up to
three levels of splitters together. Up to 512 displays can be connected by
cascading a B118-008-UHD from each port in a three level installation.
It is recommended you use Tripp Lite's P569-XXX-CERT Series Premium
High-Speed HDMI cables.
1
Make sure the power to all the devices you will be connecting is
turned off.
2
Connect the HDMI source to the Input port on the first level splitter.
Note: The length of the HDMI cable connecting the source to the splitter must
not exceed 16 ft. (5 m).
3
Connect an available Output port on the first level splitter to the HDMI
Input port on a second level splitter.
Note: The length of the HDMI cable connecting the first and second level
splitters must not exceed 10 ft. (3 m).
4
Repeat Step 3 for each additional splitter you wish to add (no more
than 3 levels of splitters can be cascaded).
5
Connect an available Output port on your splitter(s) to the display's
HDMI Input port.
Note: The length of the HDMI cable connecting the splitter to the display must
not exceed 16 ft. (5 m).
20-09-261-9336A7-Book.indb 5 20-09-261-9336A7-Book.indb 5
5
7/22/2021 11:32:57 AM 7/22/2021 11:32:57 AM