BH FITNESS H6975 Manual De Instrucciones página 11

Ocultar thumbs Ver también para H6975:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Once the heart rate program has been
selected and before pressing the
START / STOP key, press the ENTER
key to program the time limit using the
▲/▼ keys. Press ENTER again to
program
the
ENTER key one last time to program
the calories. Press START / STOP to
start the exercise.
Your hands must be placed on the
pulse sensors (R) when using these
programs.
STEADY
PROGRAM
After entering your personal data the
LEDs for the various programs will
start
flashing
MANUAL, PROGRAM, USER, H.RC
and WATT. Press the ▲/▼ keys to
select the WATT function and press
MODE. By pressing the ▲/▼ keys
you can program the watts to produce
for the exercise (between 10-350
Watt.). Select the watts and press
START / STOP to begin the exercise.
The exertion level for the exercise is
self adjusting based on the speed and
number of watts selected.
HAND-GRIP PULSE
MEASUREMENT
INSTRUCTIONS - USE
PULSE Hand-grip
On this model the pulse rate is
measured by placing both hands on
the sensors (R), located on the
handlebar, as shown in Figure nº 5.
When both hands are placed on the
sensors the heart symbol on the right-
hand side of the screen, marked
PULSE, will begin to flash and after a
few seconds a heart rate reading will
be displayed.
distance.
Press
WATT
RATE
on
the
monitor.
If both hands are not placed correctly
as shown in figure nº 6 then the pulse
function will not work.
If a «P» appears on the screen or the
heart symbol does not flash, make
the
sure that both hands are placed
correctly on the sensors.
RECOVERY TEST:
FITNESS.-
This electronic device is equipped with a
recovery test function. This offers you
the advantage of being able to measure
how long it takes your heart rate to
recover
exercise. Upon finishing the exercise
leave your hands on the pulse gauges
and press the "Recovery Test" button,
this will start a one minute countdown.
Only the Time and Pulse rate function
read-outs will remain displayed. The
electronic device will measure your
pulse rate during this minute. The heart
rate recovery time will be displayed on
the Heart rate line.
If, at any time during this minute, you
decide to abandon this test then press
the "Recovery Test" button and this will
take you back to the main screen.
When the minute is up, the electronic
device will work out the difference and
your fitness rating will be displayed up
on the screen: F1, F2,..., F5, F16; where
F1 is the best (fitness "Excellent") and
F6 the worst (fitness "Very Poor").
The comparison between the worked
heart rate and the recovery heart rate
provides a fast, simple method of
gauging how fit you are. Your fitness
rating is a guideline that shows you
how fast your heart recovers after
physical exertion. If you exercise
regularly then you will see your fitness
rating improve.
11
after
having
finished
the
Tabla de contenido
loading

Tabla de contenido