General Characteristics - Cembre PO8500 Manual De Uso Y Mantenimiento

ENGLISH
WARNING:
The hydraulic pumps manufactured by Cembre S.p.A. have been developed to be used with
crimping, cutting heads. According to this specifi c use, they do not need and are not equipped with
a safe oil non-return system.
For this reason, use in diff erent applications from that intended (for example with hydraulic jacks,
lifting systems or similar) can be dangerous for the operator.
Cembre S.p.A. does not accept any liability arising from the use of its hydraulics pumps for ap-
plications diff erent from those listed in its catalogues or other documentation.

1. GENERAL CHARACTERISTICS

– Max operating pressure: ....................................................................................850 bar (12,150 psi)
– Dimensions: length ...........................................................................................689 mm (27.1 in.)
width ............................................................................................200 mm (7.9 in.)
height ...........................................................................................210 mm (8.3 in.)
– Weight (fl exible hose included): .......................................................................9,9 kg
– High pressure fl exible hose: length ...............................................................3 m
– Oil reservoir capacity: ..........................................................................................1000 cm
– Recommended oil: ............................................................... AGIP ARNICA 32
– Two speed operation: the fi rst stage is low pressure for rapid approach, with automatic
switching to the second, high pressure stage for crimping or cutting.
– Coupler: the pump is supplied with a high pressure fl exible hose fi tted with an automatic,female,
quick-coupler, suitable for connection to a Cembre, hydraulic crimping or cutting head work-
ing at 850 bar (see Fig. 2).
– Safety: the pump is provided with a max pressure valve; a special hydraulic gauge (MPC1) is
available to purchase separately, to check the correct setting of the valve.
TWO SPEED HYDRAULIC FOOT PUMP
TYPE PO8500
SHELL TELLUS TX32
(21.8 lbs)
(10 ft)
3
or
or equivalent
4