Resume Play; To Play Back The Video Cd Manually; Changing The Tv Screen Display - Sharp CD-BK147V Manual De Manejo

Resume play

CD-BK147V
This function is to restart playback from the point where it has stopped.
During the stop mode, hold down the
button for more than 1 second.
Playback will begin at the point where playback has stopped.
Notes:
z You can perform the resume play even if the unit is set to the stand-by mode or the
function is changed from CD/VIDEO CD (CD) to another.
z Resume play cannot be performed in the P .B.C. mode.
z Resume play cannot be performed whilst opening the disc tray or after changing
the disc.
To play back the video CD
manually
Usually this unit detects the video CD and plays back pictures and sounds. In case
this unit fails to judge it correctly, you can play back the video CD manually.
1
Press the VCD AUTO/VCD button until "VCD ON" appears on the
TV screen.
2
Press the /SELECT/RESUME button.
To return to the automatic video CD detection mode:
Press the VCD AUTO/VCD button until "VCD
AUTO" appears on the TV screen.
Notes:
z This setting will be cancelled when you change the discs.
z Whilst in the "VCD ON" state, you cannot play back audio CDs.
E-23 ENGLISH
Changing the TV screen dis-
play
/ ( /SELECT/RESUME)
You can check the operation of the main unit by the on-screen display.
Each time the OSD (OSD ON/OFF) button is pressed during playback
or in the stop mode, the display will change as follows:
[During stop mode]
<TV screen>
VCD ON
[During playback]
<TV screen>
Note:
VCD AUTO
The displays may differ depending on the discs.
D I SC NO.01
No display
TNO 10 44 : 16
Total number Total playing
of tracks time
D I SC NO.01
No display
TNO 02 1 : 26
Track number Elapsed time
01/8/29 CD-BK147V(X)E3.fm