Work Light - Wagan Tech Power Dome NX 2485 Manual De Usuario

Power Dome
™

WORK LIGHT

The Work Light is a cluster of bright LEDs located at the front of the Power Dome.
The location of the Work Light allows the light to be used while the Power Dome is
being carried.
• Turn the Light Switch (located below the Pressure Gauge and Voltmeter) to
the Work Light "|" position.
• The light will illuminate.
• Turn OFF while not in use.
USING THE HAZARD FLASHER
The Hazard Flasher Lens turns the Power Dome light into a caution warning for
passing traffic.
1. Attach the red Hazard Flasher Lens Cover over the light snugly.
2. Switch the light on to Blinking mode by selecting "||" on the Light Switch.
3. Place the Power Dome in a spot easily noticed by other vehicles.
Attach Hazard Flasher Lens to Light
13
NX by Wagan Tech
www.wagan.com
®
Switch to Blinker Mode