Power Dome
™
AM/FM RADIO
The Radio can receive frequencies in the standard AM and FM broadcast bands
(AM 520–1710 kHz, FM 88–108 MHz). An extendable rod antenna provides
adequate signal to receive all local radio stations. When not in use, the antenna
should be stored in the retracted position. This will prevent damage to the antenna
while Power Dome is being moved. All Radio controls are conveniently located in
one area.
NOTE: All AM band radios are subject to receiving noise interference from
electronic devices, static lightning strikes and some motorized equipment. If you
are operating the Power Dome inverter and noise is being received on the AM
band, either turn OFF the inverter or change the radio to receive the FM band.
TURNING ON AND TUNING THE RADIO
NOTE: ON/OFF Button and AM/FM Button are the same button, but with two
functions.
1. Carefully raise and extend the antenna.
2. Tap the ON/OFF button to turn the radio on. The current frequency is
displayed, with the AM/FM band shown in the corner.
3. Tap the AM/FM button quickly to switch between AM and FM bands.
4. Tap the CH + and CH − buttons to adjust the station. Press and hold the
buttons to automatically scan stations.
7
NX by Wagan Tech
www.wagan.com
®