Maintenance/Repairs/Soldering Work/Cleaning; Maintenance; Repairs; Soldering Work - Minebea Intec PR 6130/08 Manual De Instalación

6 Maintenance/repairs/soldering work/cleaning

6 Maintenance/repairs/soldering work/cleaning
6.1

Maintenance

6.2

Repairs

6.3

Soldering work

6.4

Cleaning

Minebea Intec
Maintenance work may only be carried out by a trained technician with expert knowledge
of the hazards involved and the required precautions.
Repairs are subject to inspection and must be carried out at Minebea Intec.
In case of defect or malfunction, please contact your local Minebea Intec dealer or service
center for repair.
When returning the device for repair, please include a precise and complete description of
the problem.
Soldering work on the device is neither required nor permitted.
NOTICE
Property damage caused by unsuitable cleaning utensils/agents.
Damage to the device.
Prevent moisture from penetrating the interior.
Do not use aggressive cleaning agents (solvents or similar agents).
For use in the food industry, use a cleaning agent suitable for that particular working
environment.
Use soft sponges, brushes and cloths.
1. Unplug device from mains supply, disconnect any data cables.
2. Clean the device with a cloth lightly moistened with a soap solution.
3. Wipe down the device with a soft, dry cloth after cleaning.
Cable Junction Box PR 6130/08
EN-17